Resurfacing of Spring and Cannon Streets Scheduled to Begin Next Week

 

Charleston, S.C.—Based on the current weather forecast, the resurfacing of Spring and Cannon Streets is scheduled to begin Monday. Work is expected to last six days and will impact traffic flow and on-street parking in the area.

During the milling and paving operations, one lane of eastbound traffic on Cannon Street and one lane of westbound traffic on Spring Street will remain open. Due to the narrowness of the streets, this traffic will be diverted into the parking lanes. Therefore, on-street parking will not be available on Spring or Cannon Streets until the work is completed.

The work zone will change daily and will be clearly marked with safety barricades and flagmen. Traffic on the cross streets will be subject to intermittent traffic control as equipment works through the intersections.

One half of the roadway will be milled from end-to-end and will be paved the following day. Pavement markings will be replaced as the work progresses.

Work will take place during daylight hours, beginning at approximately 7 a.m. Weather permitting, the schedule will be as follows:

  • Monday, March 05:
    • No parking on Spring Street.
    • Spring Street: Milling south side (Coming to President).
  • Tuesday, March 06:
    • No parking on both Cannon and Spring Streets.
    • Spring Street: Paving south side.
    • Cannon Street: Milling north side.
  • Wednesday, March 07:
    • No parking on both Cannon and Spring Streets.
    • Spring Street: Milling north side (Meeting to President).
    • Cannon Street: Paving north side.
  • Thursday, March 08:
    • No parking on Spring Street until pavement markings are in place.
    • No parking on Cannon Street.
    • Spring Street: Paving north side.
    • Cannon Street: Milling south side.
  • Friday, March 09:
    • No parking on Cannon Street until pavement markings are in place.
    • No parking on Spring Street within work zone. As pavement markings are installed, parking will be opened.
    • Cannon Street: Finish milling south side. Begin paving south side.
    • Spring Street: Complete pavement markings. Intersection work may be completed as needed.
  • Saturday, March 10 AND/OR Monday, March 12:
    • Cannon Street: Finish paving south side. Intersection work may be completed as needed.
    • No parking on Cannon Street within work zone. As pavement markings are installed, parking will be opened.